全自動鋸床，也可以半自動操作，電焊鋼構件底座配合電子氣動控制的數控鋸床，支持可編程操作，用圓鋸片來切割銅鋁等輕質合金

---可進行左45°至右45°任意角度鋸切；鋸頭可以左向傾斜到45°以進行斜面切割

---最新一代MEP設計的雙軸微處理器控制，在同一段材料上，可以設定1000批次不同長度和數量的程式

---伺服馬達送料，單次最大送料長度600mm, 可以多次重復送料

---可旋轉式中央控制操縱臺便于操作者在每一個不同的位置操作鋸床和緊急停車

---二十字節四行可以顯示：編程數量和已執行數量，鋸片厚度，每次送料長度，鋸切時間，

   主電機輸出電流，診斷/報警信息

--- 報警信息和事件可以被記錄，以方便查找可能的故障

--- 根據材料的尺寸大小，可以直接從控制鍵盤精確調節鋸頭上下限位

 

  COBRA 352 NC evo, automatic/semi-automatic  electropneumatic CNC sawing machine to cut  aluminium and light alloys using blade with  electrowelded hard-metal plates (HM).

- The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts.

- Sawing machine with controlled double axis multimicroprocessor with the latest generation of controllers for CNC automatic sawing machines designed by MEP so as to obtain, on the same bar, 1000 different lots, each of different lengths and quantities.

The Standard FEATURES:

- Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.

- Display: 20 characters read on four lines so as to visualize technological parameters such as:

number of cuts programmed and carried out+ band thickness + length fed in each stroke +cutting time + amperometer + diagnostics and/or aution messages (more than 100) visualized.

- Registration of alarms and events with the possibility to visualize the story of occurred  events.

- Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).

- The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel